How to Flash Redmi note 8 pro/6/6A Flash Without Auth Using SP Flash Tool (Game OVER)
Redmi MI Note 8 Pro, Redmi 6a, Redmi 6 Without Allowed MI Account or FRP can be easily removed or logged in. No Relock, if you delete a MI account once. On Redmi 6a, this trick is used and works 100% without any Auth operation. Working on the python-based script system. Auth login access is bypassed by the script and quickly unlocked with the sp flash tool. Please read all the steps below and unlock the phone.
Notice: Please Read Properly
Download Redmi note 8 pro/6/6A Flash Without Auth Using SP Flash Tool File (Game OVER)
Name: Redmi note 8 pro/6/6A Mi account remove Flash File Without AUTH.zip
Size: 96MB
Password: officialroms
Link:
Size: 96MB
Password: officialroms
Link:
USERUPLOAD | MEDIAFIRE | ANDROIDFILEHOST
How to USE Without Auth
- Trust the method {if you have concerns, ignore them}
- Install python-3.9.1-amd64(install for all users) & install python-3.9.1-amd64(install for all users) first (add python 3.9 to the path)
- Invoke cmd {command prompt}copy and enter "python -m pip install pyusb pyserial json5" command.
ensure an active internet connection
- collecting pyusb ii.pyserial
- json5ensure all 3.py's are downloaded.
- install libusb-win32-devel-filter-1.2.6.0.exe
- Launch it, a libusb win32 filter installer should pop up with 3 options select "install a device filter".to.
- At Device Selection you with see available HardWare ID
- ensure your device is powered off press and hold the volume + button and insert the USB cord
connect device hardware id will be added to the list
- You should get a pop-up saying "libusb-win32 device filter successfully installed for MTk USB Port." After you get this message, eject the USB card.
- Open the folder BYPASS-AUTHORIZED-XIAOMI-FREE, open the bypass folder, and run Brom.
- You will receive a message waiting for bootrom {cmd window}by pressing and holding volume + again and inserting the USB cable.
- after all, is done close the command prompt.
How to Setup You SP Flash Tool
- Head over to the flash tool from sp
- Choose choices
- Connecting
- Choose UART
- Pick your COM port connecting system (check device manager)
- Switch the BAUD rate to 92160000
- Now find the firmware you downloaded and pick the scatter file
Flashing will begin Momentarily.
- Delete the REDMI6 REDMI6A MIACCOUNT FRP file
- Scatter open and flash with sp flash tool
- Delete the Mi Account lock and Unlock Frp.
- AUTO INSTALLER mtk USB DRIVER
- Download Flash File Redmi Latest Stock ROM